Features
Enerdrive | Dometic B-TEC LiFeP04 12v 100Ah G2 Lithium Battery
Available in 12v 100Ah, 125Ah, 200Ah, 300Ah and 400Ah capacities and 24v 150Ah & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Smart Phone Monitoring System
The Enerdrive | Dometic B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
- Battery Capacity
- Battery Voltage
- Battery Current (Amps)
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery. Please note that a fully discharged battery (BMS is off) requires charging within 14 days to avoid cell damage.
Enerdrive B-TEC 12V 100Ah G2 Lithium Battery
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Normal Specification EPL-100-12VLITE Nominal Voltage 12.8V Nominal Capacity 100Ah Cycle Life (DOD – 80% under controlled conditions) ≥ 2000 Cycles Standard Charge Specification (Lithium profile charger required) Battery Charge Temperature 0 ̴ 45°C Normal Charge Voltage CV/CC* 14.20 ̴ 14.60V Standby (Float) Voltage 13.50 ̴ 13.60V Maximum Charge Current 80A @ 25°C for 30mins Recommended Charge Current for Maximum Life ≤33A Standard Discharge Specification Battery Discharge Temperature -20 ̴ 60°C Battery Output Voltage Range 11.00 ̴ 14.60V Maximum Discharge Current 100A @ 25°C ± 5°C for 30mins Pulse Discharge Current 450A for 1.0s Discharge Cut-off Voltage ≤11.20V Circuit Protection The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. Over-Charge Protection Over-charge Protection Per Cell 3.90V ± 0.03V Over-charge Release Per Cell 3.60V ± 0.05V Over-charge Release Method Discharge below release voltage Over-Discharge Protection Over-discharge Protection Per Cell 2.50V ± 0.05V Over-discharge Release Per Cell 3.20V ± 0.05V Over-discharge Release Method Apply Charge/Voltage ≥12.8V Battery Manual Reset Button No Over Current Protection Discharge Over Current 110A for 30s – 450A for 1s Protection Reset Time 5s Auto Release Over Current Release Method Disconnect Load Over Temperature Protection Battery Discharge Over Temperature Protection to 65°C ± 5°C Release at 50°C ± 5°C Battery Charge Over Temperature Protection to 55°C ± 5°C Release at 45°C ± 5°C Short Circuit Protection Auto release after 5s Mechanical Characteristics Dimensions Length 310mm Designed to be mounted in the upright position Width 170mm Height 225mm Weight Approx 12kg Storage Information Temperature & Humidity Range ≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH ≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH Self-discharge Rate ≤ 3% Per Month Note: Specifications subject to change without notice.