nerdrive B-TEC LiFeP04 12v 200Ah G2 Lithium Battery
Available in 12v 100Ah, 125Ah, 200Ah and 300Ah capacities and 24v 100Ah & 36v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Enerdrive B-TEC LiFeP04 12v 200Ah G2 Lithium Battery
Smart Phone Monitoring System
The Enerdrive B-TEC G2 battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
Battery Capacity
Battery Voltage
Battery Current (Amps)
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information
Battery Management System
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.
he New Generation 2 B-TEC
So, How does the New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery measure up against it original predecessor? Let’s have a look.
Dimension
Original
Generation 2
Length
485mm
505mm
Width
170mm
172.5mm
Height
245mm
265mm
The increase in height allows for full 360° connection of the battery cables the make installation easier and more flexible. Also included for free is a metal battery tray and hold down strap to complete the installation process.
The G2 now incorporates a “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
The new G2 also includes a RS485 communications port located on the top of the battery. This port allows for integration onto other CanBus systems for data monitoring and recording.
The New Enerdrive Generation 2 (G2) B-TEC 200Ah Lithium Battery now comes with a 5 year warranty, giving you peace of mind that this product will keep you covered.
With over 7 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.
With over 3000 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.
Please note B-TEC batteries must not be installed – • In vehicle engine bays or in high heat environments, refer to Section 10 – Battery Specifications of the manual. • In wet areas such as caravan chassis mounts, open ute trays or boat deck areas. • Inside compartments dedicated to carrying gas.
This product is not suitable to mount anywhere with a possibility of being exposed to the elements. It is an electronic product designed for internal use ONLY.
Specifications
Normal Specification
EPL-100BT-12V-SLIM
EPL-125BT-12V G2
EPL-200BT-12V G2
EPL-300BT-12V G2
Nominal Voltage
12.8V
Nominal Capacity
100Ah
125Ah
200Ah
300Ah
Cycle Life (DOD – 80% under controlled conditions)
≥ 2000 Cycles
Standard Charge Specification (Lithium profile charger required)
Battery Charge Temperature
0 ̴ 45°C
Normal Charge Voltage CV/CC*
14.20 ̴ 14.60V
Standby (Float) Voltage
13.50 ̴ 13.80V
Maximum Charge Current
80A @ 25˚C for 30mins
60A @ 25°C for 30mins
150A @ 25°C for 30mins
190A @ 25°C for 30mins
Recommended Charge Current For Maximum Life, Charge in the lower amperage range
20~50A
20~60A
40~100A
60~120A
Standard Discharge Specification
Battery Discharge Temperature
-20 ̴ 60°C
Battery Output Voltage Range
11.00 ̴ 14.60V
Maximum Discharge/Pulse Current
100A @ 25˚C ±5˚C for 30 mins
100A @ 25˚C ±5˚C for 30 mins
200A @ 25˚C ±5˚C for 30 mins
250A @ 25˚C ±5˚C for 15 mins
Pulse Discharge Current
250A for 1.0s
450A for 1.0s
Discharge Cut-off Voltage
≤11.20V
Circuit Protection
The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Over-Charge Protection
Over-charge Protection Per Cell
3.90V ± 0.03V
Over-charge Release Per Cell
3.60V ± 0.05V
Over-charge Release Method
Discharge below release voltage
Over-Discharge Protection
Over-discharge Protection Per Cell
2.80V ± 0.05V
Over-discharge Release Per Cell
3.20V ± 0.05V
Over-discharge Release Method
Apply Charge/Voltage ≥12.8V
Battery Manual Reset Button
No
Yes
Over Current Protection
Discharge Over Current
110A for 30s – 450A for 1s
110A for 30s – 450A for 1s
220A for 30s – 450A for 1s
280A for 25s – 400A for 3.5s
Protection Reset Time
Approx 10s Auto Release
Over Current Release Method
Disconnect Load
Over Temperature Protection
Battery Discharge Over Temperature
Protection to 65°C ± 5°C
Release at 50°C ± 5°C
Battery Charge Over Temperature
Protection to 55°C ± 5°C
Release at 45°C ± 5°C
Short Circuit Protection
Auto release after 5s
Dimensions
Length
551mm
318mm
505mm
521mm
Width
110mm
165mm
172.5mm
280mm
Height
240mm
232mm
265mm
238mm
Weight
Approx 12.5 Kg
Approx 15.5 Kg
Approx 25.0 Kg
Approx 38.2 Kg
Case Construction
Hi Impact ABS Plastic
Storage Information
Temperature & Humidity Range
≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH
≥ 90 days -10°C ̴ 45°C, 5 ̴ 75% RH
Self-discharge Rate
≤ 3% Per Month
Note: Specifications subject to change without notice.